AK Rifles banner

1 - 4 of 4 Posts

·
Registered
Joined
·
184 Posts
Discussion Starter · #1 · (Edited)
WTS - Yugo Milled M70B fixed stock parts kit with barrel

I have for sale a good condition Yugoslavian M70B (fixed stock) kit with barrel. The kit is one of the earlier APEX imports from around 2009, it is a milled "M70" kit. All parts are correct for the milled M70, including the Milled first pattern bolt carrier AND bolt with angled bottom edges (machining operations that were omitted on later bolt heads) thicker top cover, solid fully milled mag catch, vented gas tube,and non vented gas block with grenade site. The kit is Non-matching, but these old Yugo numbers come off with simple sandblasting, so a few min in a sandblaster and the parts will not be numbered at all. The wood has a bit of Balkans War evidence on it, mainly the upper hand-guard, and an X carved into the lower. Comes with everything you will need to build minus receiver, US 922(r) parts are pictured and included. These kits are not available anymore, Yet the correct receivers are now available from CNC warrior and have not been for several years, the only milled kits in the last few years were the barrel less underfolders from akbuilder.

Price is $350 Shipped OBO
Item is located in SC.
I accept discreet Paypal, or Money Orders.

IMG_20140220_124514_081.jpg
IMG_20140220_124646_298.jpg
IMG_20140220_124622_995.jpg
IMG_20140220_124523_267.jpg

These build up into awesome milled M70's with nothing more than a CNCWarrior receiver available right now! Milled fixed stock M70's are a very rare AK in the USA once built. This kit can be sandblasted, the wood sent through a dishwasher and sanded with a simple vibrating hand sander then polyurethane applied, to make a really minty Milled fixed stock M70!



The barrel has good rifling and a good chamber, but does not pass the bullet test and would need to be counterbored about one inch to make it accurate.
I have counterbored Yugo barrels with a 9mm drill bit on a drill press for one of my junker builds, and it shot just as accurate as my WASR's If you want a nice kit with a new barrel, you will have to purchase a new barrel from Brownells or Green Mountain. I have found the ESS Solutions barrels like akbuilder sells to be more accurate shooting, but less accurate looking inside and out, as they use six grove rifling rather then the correct Soviet pattern four grove.
 

·
Registered
Joined
·
184 Posts
Discussion Starter · #2 ·
Additional Pictures:

IMG_20140220_124547_717.jpg
IMG_20140220_124634_598.jpg
IMG_20140214_241046_001.jpg
IMG_20140212_180523_358.jpg
 

·
Registered
Joined
·
184 Posts
Discussion Starter · #3 ·
Bump with new price!
 

·
Registered
Joined
·
184 Posts
Discussion Starter · #4 ·
Kit still availible!
 
1 - 4 of 4 Posts
Top