AK Rifles banner
21 - 40 of 62 Posts

·
Vendor
Joined
·
191 Posts
Discussion Starter · #21 ·
Blue ZAK01 Scope Mount for Yugo spec rifles and carbines. Same great ZAK01 mount but anodized blue. This was a one time, limited run.

CRH Customs Lightweight Extended Charging Handle for Serbian / M70 Pattern AKs. Made from 6061 aluminum, these charging handles are 35mm in length and weighs 20 grams. These are made specifically for Serbian M70 pattern rifles such as the Zastava ZPAP M70. Anodized Black. Comes with red high strength thread locker. Knurled surface.

Easy to install. requires no permanent modifications.

BLUE YUGO M70 N-PAP QD SIDE MOUNT SCOPE RAIL, $69.95
BLUE YUGO M70 N-PAP QD SIDE MOUNT SCOPE RAIL


YUGO EXTENDED CHARGING HANDLE, BLUE, $24.95
YUGO EXTENDED CHARGING HANDLE, BLUE, CRH CUSTOMS / CIRCLE 10 AK


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #22 ·
Midwest Industries, Gen2 Extended AK47/74 Universal, Handguard, M-LOK Compatible, Rail Topcover, Black

Fits most standard AK-47s" AK-74s & variants
Stamped & milled" 11.5 inches in length" weighs only 16 ounces
Patented clamping system
Picatinny Rail Topcover

The Midwest Industries Gen 2 Extended AK-47/AK-74 Universal M-LOK Handguard brings the AK platform into the 21st century. Machined from 6061 aluminum and given a durable hard coat anodized finish, this handguard comes equipped with M-LOK accessory mounting slots along its length for the addition of tactical accessories. Where accessories are not present, the handguard remains sleek and smooth for improved handling and user comfort. This model comes with a Picatinny Rail top half, and is extended to 11.5" in length. Installation may require removal of the rifle's handguard end cap assembly. Like with all Midwest Industries products, this handguard is proudly made right here in the USA and features a lifetime warranty.

MI AK47/74 GEN2 EXTENDED HANDGUARD, MLOK, RAILED TOP COVER, $234.95
MI AK47/74 GEN2 EXTENDED HANDGUARD, MLOK, RAILED TOP COVER


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #23 ·
Awesome new quick detach optics mount for your Yugo/Zastava M70, N-Pap and similar models that have the Yugo style side rail mounted on the receiver.

V-Notch picatinny grooves allow for the use of iron sights while the mount is installed.

Nicely thought out mount. Light weight, beautifully machined and completely dehorned.

YUGO M70 N-PAP QD SIDE MOUNT SCOPE RAIL, $29.95
YUGO M70 N-PAP QD SIDE MOUNT SCOPE RAIL


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #24 ·
The M4-AK SB shock absorbing buttstock replaces your AKM stock with an M16/M4 collapsible and right-folding stock. This is the top of the line model with hardened steel Galil hinge assembly. Clever recoil reducing shock absorber built into the M4 style buffer tube. Stock has numerous quick detach and traditional style sling attachments. Water tight storage compartment is hidden under the swing down rubber buttpad.

Advantages:
Non slip design provides superior shoulder positioning enhancing tactical performance
Stock manufactured to fit your AKM 47 stamped receiver
Shock Absorbing Mechanism Reduces Recoil
Integrated quick detach sling swivel connectors on both sides
Original GALIL folding mechanism made of Mill-Spec Hardened steel - stands extreme abuse
After market sized 6061 hard anodized shock-absorbing aluminum buffer tube recoil reducing buffer, improves accuracy and "on-target" time during rapid fire
Fits any M4 collapsible stock
Built-in sealed batteries compartment
Quick stock deployment, folds to the right side
Ideal for use in confined areas and close-quarter engagements
Minimal size when folded
The toughest folding stock available

RECOIL REDUCING M4 FOLDER AKM AK47 W/ STEEL GALIL HINGE, $393.55
RECOIL REDUCING M4 FOLDER AKM AK47 W/ STEEL GALIL HINGE


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #25 ·
Swiss made, military grade B&T AKM-AK74 tri-rail handguard. Fits most stamped receiver AK47-AK74 style weapons, depending on your particular rifle, fitting may be required.

B&T Switzerland is a world leader in arms innovation. These same hand-guards are in use by several militaries around the world. Buy with confidence; B&T is the best of the best.

B&T AK47 AK74 TRI-RAIL HANDGUARD - SWISS MADE, 349.95
B&T AK47 AK74 TRI-RAIL HANDGUARD - SWISS MADE


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #26 ·
A great, new U.S. made scope mount from Arsenal.

After the successful fulfillment of a military requirement, Arsenal, Inc. has released the SM-13 to the commercial market. This side-attaching scope mount for the AK variant rifles was born to meet and exceed the toughest objectives put in front of Arsenal, Inc. The one-piece CNC precision machined SM-13 is manufactured from aircraft grade aluminum alloy for the minimum weight (only 5.76 ounces) and maximum strength.

The over-7.5-inches-long Picatinny rail that runs along the rifle, from the end of the top cover to the rear sight leaf, allows for attaching multiple devices at the same time or one device for the maximum eye relief. The SM-13 follows the contour of the rifle closely. The absolute low profile and the relief cut along the rail allow the use of the iron sights even when the scope mount is attached to the rifle.

The SM-13 utilizes the time-proven steel adjustable locking mechanism that allows instantaneous attachment and release of the scope mount without any compromise to the accuracy and loss of zero. Unlike some other mounts that attach to unstable top covers or gas tubes, the SM-13 attaches to the side scope rail of an AK variant rifle, which provides the most stable attaching platform on the rifle.

ARSENAL SCOPE MOUNT, LOW PROFILE RAIL, $159.95
ARSENAL SCOPE MOUNT, LOW PROFILE RAIL


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #28 ·
East German brown pebble grain buttstock. New old stock condition. These are unissued. May have minor storage marks but are otherwise new.

Original East German, DDR production fits all stamped receiver AK47 and AK74 rifles with fixed stock or wire folder trunnions. These are the earlier style with smooth buttplate.

NEW/UNISSUED EAST GERMAN AKM AK47 AK74 BROWN PEBBLE GRAIN BUTTSTOCK $24.95
AKM AK47 AK74 BROWN PEBBLE GRAIN BUTTSTOCK NEW


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]




 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #29 ·
The railed gas tube will fit all stamped and milled receiver AK rifles with a standard length gas tube. Length is adjustable for variation between rifle manufacturers. May not fit all AK variants; please contact if unsure of fit. Any modification to product will void all warranty.

The 5 inches of Picatinny rail provides space to mount optics and accessories. The low profile of the rail allows lower 1/3 co-witness with some optics. The Railed Gas Tube will work with factory handguard, independent of the Short and Long Bottom Rails.

Replaces factory gas tube easily; no gunsmithing required. Machined from hardened aircraft aluminum and finished in MIL-SPEC hardcoat anodizing. Attach optics and accessories to the Picatinny Rail.

TROY AK47 RAILED GAS TUBE, $124.95
TROY AK47 RAILED GAS TUBE


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #30 ·
LANTAC Drakon Muzzle Brake DGNAK47B for AK47 Style Rifles.

Manufactured to the highest quality standards and featuring a patent pending design, the LANTAC DGNAK47B Muzzle Brake offers improved recoil management and muzzle rise over competitors' products.
Its unique Short Energy Pulse system reduces length of recoil so that repeating shot energy cannot overlap and knock the shooter off target.
Full auto fire is possible with massively reduced recoil and muzzle climb, meaning that all shots fall on target.

Ultra Fast Attenuation of muzzle blast gasses means that Flash Signature is also reduced.

LANTAC DRAKON MUZZLE BRAKE FOR AK47, 7.62MM, 14x1 LH, $134.95
LANTAC DRAKON MUZZLE BRAKE FOR AK47, 7.62MM, 14x1 LH


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #32 ·
AC-Unity German market AK47 30rd magazines are back, and so is our special deal on them! While supplies last we are going to sell these 30RD and the 40rd versions in 20-Packs for only $99! That’s less than $5 per mag! Load up on mags or start your own group buy, because when they're gone, they're gone!

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
20-PACK GERMAN MARKET AC AK47 30RD MAGS, UNDER $5 EACH


20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
20-PACK GERMAN MARKET AC AK47 40RD MAGS, UNDER $5 EACH


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #33 ·
Triangle Stock with folding mechanism for your 2-bolt receiver.

The CRH Customs 2-Bolt - 8.5 Inch - was made specifically for usage with 10-32 side folding adapters. This stock is milled from billet 6061 aluminum and has an anodized finish. Uses standard 10-32 hardware and comes with a Stormwerkz folding mechanism. All mounting hardware is included.

Made in the USA and is considered one 922(r) compliant part.

AK 2-BOLT TRIANGLE STOCK WITH FOLDING MECHANISM, CRH CUSTOMS / CIRCLE 10 AK, $159.95
AK 2-BOLT TRIANGLE STOCK WITH FOLDING MECHANISM, CRH CUSTOMS / CIRCLE 10 AK


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #34 ·
FIME's Fire Control Group is absolute excellence in engineering, featuring a short .35" length of travel, smooth 2.8-pound pull, and a corrosion resistant black oxide coating. This mil-spec hardened steel fire control group was created to excel over the competition.

AK RPK FIME GROUP ENHANCED TRIGGER KIT, $64.99
FIME GROUP AK RPK ENHANCED TRIGGER KIT


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]

 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #35 ·

·
Vendor
Joined
·
191 Posts
Discussion Starter · #36 ·
Arsenal Bulgaria AK 5.56x45mm 30rd black polymer magazine. This .223 magazine is high-quality Bulgarian circle ten production made with steel reinforcements on the rear lug, front lug and front spine.

Weighs just 7.6 ounces.

Made in Bulgaria with Circle Ten proof.

AK 5.56MM 30RD MAG BLACK, BULGARIAN CIRCLE 10, $47.95
AK 5.56MM 30RD MAG BLACK, BULGARIAN CIRCLE 10


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #37 ·
Midwest Industries, Generation 2, M70 Handguard, M-LOK Compatible, Rail Topcover, Black

Patented clamping system
Two anti-rotation QD sockets
Lightweight& rugged
M-LOK compatible
One 5 slot mil-spec 1913 picatinny rail top cover

The Midwest Industries Gen 2 Universal M-LOK Handguard brings the AK platform into the 21st century. Machined from 6061 aluminum and given a durable hard coat anodized finish, this handguard comes equipped with M-LOK accessory mounting slots along its length for the addition of tactical accessories. Where accessories are not present, the handguard remains sleek and smooth for improved handling and user comfort. This model comes with a Picatinny top half, and is compatible with Midwest's optic-specific top halves (sold separately). Fits Yugo M70 pattern rifles only. Installation is quick and easy, and generally requires no permanent modification to the host firearm. Like with all Midwest Industries products, this handguard is proudly made right here in the USA and features a lifetime warranty.

MIDWEST INDUSTRIES YUGO M70 MLOK HANDGUARD WITH PICATINNY TOP COVER, $159.95
MIDWEST INDUSTRIES YUGO M70 MLOK HANDGUARD WITH PICATINNY TOP COVER


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
191 Posts
Discussion Starter · #40 ·
The most rigid platform available today for AK.

Advantages:
Unique mounting system totally eliminates movement of the system in any conditions.
Optic rail is removable.
Designed for hard military use.
Modernizes the AK-47/74.
Precision machined from solid blocks of aviation-grade 6061 T6 aluminum and hard coat anodized.
MIL-STD-1913 rails.
Drop-in installation.

Due to a wide variety of AK models assembled by various manufacturers and individuals from different combinations of new and surplus parts, we cannot guarantee perfect fit on all AK rifles. This product was designed specifically to fit Russian-made rifles. Some rifles may require slight fitting of this product or of the rifle.

Will not fit Yugo M70 rifles or clones.

FAB DEFENSE AK47/74 ALUMINUM QUAD RAIL WITH SCOPE MOUNT, $351.35
AK47/74 ALUMINUM QUAD RAIL WITH SCOPE MOUNT, FAB DEFENSE


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 
21 - 40 of 62 Posts
Top