AK Rifles banner

1 - 20 of 73 Posts

·
Premium Member
Joined
·
624 Posts
Discussion Starter · #1 · (Edited)
The dimple tool is designed to use with any 1MM AKM/1.5 receiver, especially the Childers and Recreator preheat treated AKM receivers. The tool fully supports the receiver so you will not damage or distort it. It is made up of a base Plate made out if CRS and a male & female form tool made out of O-1 Tool steel professionally heat treated to 40/44Rc. The base shim is used to support the tool and be able to remove the tool after you form the dimple. It has a slot in it for clearance so you won't damage the dimple when you flip the receiver over to do the opposite side. The Female piece is cut to fit close to edges.
The tool comes with a plate for use with standard 1MM AKM receivers and also a plate stamped with 1.5 stamped on it for the thicker Yugo receivers.
The cost is $36 Cash, MO, Zelle.
I do have business PP, no F&F $37
I ship the next day after receiving payment. If you have any questions PM me.
Send me a PM If you want one and I will give you payment info.
 

·
Registered
Joined
·
90 Posts
If you have any left, I'll take a Dimple tool with the base plate for 1MM receivers for $27 shipped.
I'd prefer to pay with USPS MO. Let me know where to send payment.
 
1 - 20 of 73 Posts
Top