AK Rifles banner
141 - 160 of 193 Posts

·
Vendor
Joined
·
819 Posts
Discussion Starter · #141 ·
The X Series muzzle brake and suppressor adapter remains installed on your firearm and allows direct threading of several suppressors! It's lighter, shorter, simpler and less expensive than most QD systems on the market while maintaining all the positive attributes of a direct thread mount! There are no adapters involved the suppressor threads DIRECTLY onto the mount!

What makes the 360 unique?

3 baffles to protect your suppressor
No timing required
Simple, no adapters
Remains installed on your firearm
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil
Reduced Flash
Blast Shield Available

Specifications
Includes Bushing Needed for Zastava M85
26-1.5 LH Barrel Threads
1.48" long (adds approx 1")
9mm Bore
"Omega" 1 3/8x24 (1.375-24) External Threads
17-4ph Stainless
Black Nitride
Compatible with BDS-37 Blast Diversion Shield and "Omega" thread suppressors

JMAC CUSTOMS 360 MUZZLE BRAKE 26-1.5 FACEMOUNT, X37, FOR M85, $123.21
JMAC CUSTOMS 360 MUZZLE BRAKE 26-1.5 FACEMOUNT, X37, FOR M85


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #142 ·
I found 2 of these tucked away in the warehouse today so I took some quick photos and am offering them up here first. These are the ONLY 2 that I found.

Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.


Polish AK47 laminated buttstock for milled receiver AK47. These are new unissued old stock. Genuine Polish military production made at the Radom factory.

Each stock has TWO tang cuts for the upper and lower tangs of a milled receiver AK.

AK47 MILLED LAMINATE BUTTSTOCK NEW, $99.95
AK47 MILLED LAMINATE BUTTSTOCK NEW



AK47 MILLED LAMINATE BUTTSTOCK NEW, $99.95
AK47 MILLED LAMINATE BUTTSTOCK NEW



Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #143 ·
(R)ecoil(R)eduction(D)evice(360)DegreePorts(13R)13x1(S)houlderMount(KM)KeyMount

What makes the 360 unique?

3 layers of protection for your suppressor
No timing / shims not required
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil

Specifications:

13x1 Barrel Threads
2.050" long (adds approx 1.45")
10mm Bore
KeyMount and KeyMicro Compatible
17-4ph Stainless
Black Nitride

JMAC CUSTOMS 360 MUZZLE BRAKE FOR GALIL 13X1, KEYMOUNT/KEYMICRO, $103.46
JMAC CUSTOMS 360 MUZZLE BRAKE FOR GALIL 13X1, KEYMOUNT (KEYMICRO)


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #144 ·
I have 2 of these left. On Sale $100 OFF!!!

Swiss made, military grade B&T AKM-AK74 quad rail handguard. Fits most AKM style weapons, depending on your particular rifle fitting may be required. B&T Switzerland is a world leader in arms innovation. These same hand-guards are in use by several militaries around the world. Buy with confidence, B&T is the best of the best.

Original MSRP - $499.95 Save $100.00

B&T AK47 AKM QUAD-RAIL HANDGUARD - SWISS MADE, $399.95

B&T AK47 AKM QUAD-RAIL HANDGUARD - SWISS MADE






Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #145 ·
Midwest Industries, Gen2 Extended AK47/74 Universal, Handguard, M-LOK Compatible, Rail Topcover, Black

Fits most standard AK-47s" AK-74s & variants
Stamped & milled" 11.5 inches in length" weighs only 16 ounces
Patented clamping system
Picatinny Rail Topcover

The Midwest Industries Gen 2 Extended AK-47/AK-74 Universal M-LOK Handguard brings the AK platform into the 21st century. Machined from 6061 aluminum and given a durable hard coat anodized finish, this handguard comes equipped with M-LOK accessory mounting slots along its length for the addition of tactical accessories. Where accessories are not present, the handguard remains sleek and smooth for improved handling and user comfort. This model comes with a Picatinny Rail top half, and is extended to 11.5" in length. Installation may require removal of the rifle's handguard end cap assembly. Like with all Midwest Industries products, this handguard is proudly made right here in the USA and features a lifetime warranty.

MI AK47/74 GEN2 EXTENDED HANDGUARD, MLOK, RAILED TOP COVER, $249.95
MI AK47/74 GEN2 EXTENDED HANDGUARD, MLOK, RAILED TOP COVER


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #146 ·
High quality machined folding buffer tube adapter for your AK Pistol or other pistol designed to mount an AR buffer tube.

The SB-Tactical BTFA Buffer Tube Folding Adapter is designed for use with all buffer tube receptacles, but is NOT compatible with AR platforms.

Image 2 shows the BA-AKNT Brace Adapter; sold separately.

Features & Specifications:

Low-profile design.
Reversible for right or left side-folding.
Locks in both the open and closed positions.
Made of 6061 type III anodized aluminum.
Designed for use with all buffer tube receptacles.
NOT compatible with AR platforms.
Weight: 3.4 oz
OAL: 1.5 Inch (adds only 1.1 Inch when installed)

SB-TACTICAL BUFFER TUBE FOLDING ADAPTER, $109.99
BUFFER TUBE FOLDING ADAPTER, SB-TACTICAL


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #147 ·
The BA-AK1913 Brace Adapter allows for easy installation of an M1913 (Picatinny) interface on the rear of AK47/74 pistols. The ideal solution for FS1913 and TF1913 equipped AKs, the BA-AK1913 accepts flat and sloped AK receivers.

Features
AK to M1913 (Picatinny) adapter
Fits AK47/74 pistols
Steel forks and 7075 aluminum housing
Simple and secure installation

SB-TACTICAL BA-AK1913 BRACE ADAPTER, $39.95
BA-AK1913 BRACE ADAPTER, SB-TACTICAL


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
www.rtgparts.com
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #148 ·
Polish Tantal quick detach bipod new in wrap. This spring loaded bipod attaches to the Tantal flash hider. Will also work on most other AKs. Original Polish military production.

TANTAL BERYL BIPOD NEW IN WRAP, $24.95
TANTAL BERYL BIPOD NEW IN WRAP


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #149 ·
We've had another big rush for these since the anti-American left is beating the gun control drums again, but prices are not changing, no matter what the demand. You can still get these 30rd and 40rd magazines for under $5 a piece when buying our 20-packs. Of course, we will run out at some point, but for now, gear up!

AC-Unity German market AK47 30rd magazines are back, and so is our special deal on them! While supplies last we are going to sell these 30RD and the 40rd versions in 20-Packs for only $99! That’s less than $5 per mag! Load up on mags or start your own group buy, because when they're gone, they're gone!

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
20-PACK GERMAN MARKET AC AK47 30RD MAGS, UNDER $5 EACH


20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
20-PACK GERMAN MARKET AC AK47 40RD MAGS, UNDER $5 EACH


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #150 ·

·
Vendor
Joined
·
819 Posts
Discussion Starter · #151 ·
Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.

Russian bakelite 30rd AK47 7.62x39mm magazine. Tula production with star proof & flat base plate.

AK47 BAKELITE 30RD MAGAZINE, RUSSIAN TULA, FLAT BASE PLATE, $129.95
AK47 BAKELITE 30RD MAGAZINE, RUSSIAN TULA, FLAT BASE PLATE


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #152 ·
Have you ever struggled or broken skin trying to manipulate the gas tube lever or the lower handguard retainer on your AK? This simple tool will forever alleviate that pain and keep your knuckles pristine and ready for hand modeling!

4130 hardened to 45 HRC
Water jetted
Made in the USA

AK HANDGUARD RETAINER & GAS TUBE LEVER WRENCH, $15.95
AK HANDGUARD RETAINER & GAS TUBE LEVER WRENCH


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #153 ·
Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.

AK47 wood buttstock. I don't have a whole lot of info on this as I found it in the warehouse by itself. Looks like someone attached the wrong sling loop to it. Based on previous inventory, it is an import and my guess is that it is Polish, but I am not 100% sure.

AK47 WOOD BUTTSTOCK, $119.95
AK47 WOOD BUTTSTOCK




Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #154 ·
Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.

Wood RPD Buttstock complete with backplate assembly. Made in Poland at the Radom Factory. Cold war production and still in unissued condition. Expect small transit or storage marks.

ONLY 1 AVAILABLE, RPD BUTTSTOCK, $89.95
RPD BUTTSTOCK



Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #156 ·
Finally, a drop-in solution for taming the notoriously-overgassed AK platform. The patented KNS AK Adjustable Gas Piston is a replacement for the AK’s piston head that attaches to the bolt carrier in about 10 minutes with no major gunsmithing or permanent modification required. The user is granted an extremely wide range of gas adjustment for suppressed and unsuppressed use, as well as a variety of different kinds of ammunition.

A good rule of thumb to determine if our piston will be useful, is if your gun throws the brass over 15 feet. This can signify excess gas pushing the carrier back at a higher velocity and pressure, than is needed for effective operation. Most (but not all) AKs are over-gassed. This causes more recoil, more wear and tear, and less controllability. Many users are surprised to feel the difference in how their gun shoots with our Adjustable Gas Piston System installed.

Variations in the AK platform, the use of some after market parts and a properly-tuned and gassed firearm may not greatly enhance the performance and may impede function due to under-gassing or interference.

KNS has redesigned and improved the adjustment collar for your AK Adjustable Gas Piston. With robust collar geometry and the addition of a roller detent, this version is MUCH stronger and protects all critical components from impact.

There is no need to remove or replace your gas block for adjustability. Just change the piston, and go shoot.

Small Bore/Caliber pistons are for .223″, 5.56mm, and 5.45mm. They work better in AK’s of ALL CALIBERS with less excess gas.
Large Bore/Caliber pistons are for 7.62×39, .308″, and 7.62x54r.

Key Benefits:

Updated Mod 2 Collar
Tool-Free Adjustment
Reduces Recoil
Tune almost any AK for suppressed use
Decrease cyclic rate for full-auto fire
US-made 922r Compliance Part
Piston head assembly made from corrosion-resistant stainless steel
All surface parts nitrided for durable, low-friction, & easily-cleaned operation

KNS ADJUSTABLE GAS PISTON, ALL AK MAKES AND MODELS, FROM $135.00
RTG Parts - Gun Parts and Militaria - RTG Parts, LLC


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #157 ·
The new AC-Unity 30rd Gen2 clear magazine for AK47 is now in stock. For those who want tank like construction, this is the mag for you. The Gen2 is a refined and heavier duty magazine than the Gen1 mag that it is replacing. Same great function, now with a more streamlined, integrated baseplate and Yugo style Bolt Hold Open (BHO) follower.

Constructed from an even denser, more indestructible polymer than the already strong Gen1 mags.

New baseplate design is less bulky and more attractive. Will work better with most mag pouches. Triple detent mag insert for an even greater impact resistance and strength.

Ribbed rear of the mag provides a great grip in wet climates and looks great too.

The Gen2 mags answer the common customer request to incorporate the AC AK74 style baseplate onto the AK47 magazines. Going forward the Gen2 Window mags will replace Gen1 Window AK47 mags. The Gen1 non-windowed magazines will not be replaced or phased out.

The Gen2 clear 30rd 7.62x39mm is impact resistant, lightweight, and highly reliable for all AK47/AKM weapons. Will fit and function in all 7.62x39 AK47 style rifles/carbines/pistols that use standard AK mags.

Made from an advanced, German made polymer-resin/granulate that is light weight and extremely shock resistant. The body is impact resistant through a wide range of temperatures. This polymer is exclusive to AC-Unity and gives these mags a huge edge in weight and durability.

Front and rear locking lugs and BHO reinforcements are machined from German GD ZN 410 metal legure; this is a specific German marine grade metal-alloy that is hardened, anti-magnetic, highly anti-corrosive with great wear properties.

Carbon wire spring has a lifetime warranty against corrosion and will not degrade from use or loaded storage.

Reinforced bolt hold open follower (Yugo Style BHO) works as a last round fired bolt hold open on all AKs.

This mag is built to last using state of the art materials! AC-Unity magazines are used by Bosnian Defense Forces and other militaries in Europe and the Middle East. Not just military grade; but current military issue.

Lifetime warranty against defect, loss of spring strength or corrosion.

NEW!!! AK47 30RD 7.62X39 GEN2 CLEAR MAGAZINE, BHO FOLLOWER, NOW AVAILABLE, $13.95
AK47 30RD 7.62x39 GEN2 CLEAR MAGAZINE, BHO FOLLOWER, NOW AVAILABLE


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #158 ·
Great stock option for your fixed stock, stamped receiver AK. ProMag, Archangel, Stock, Black, AK-series 4Position Stock, With Recoil Pad And Adjustable Cheek Riser.

Fits stamped-receiver AKs - some minor fitting may be required
Click-adjustable cheek-riser for an optimum sight picture
Slip-on recoil pad

AA123 Archangel OPFOR AK-series 4-position adjustable butt-stock fits most stamped-receiver AKs. The butt-stock includes a seven-position adjustable cheek-riser allowing an optimum sight picture with both iron and glass sights. Four Quick Disconnect sling sockets for a world of flexibility.

Fits to standard stamped recevier AK47, AKM & AK74 rear stock trunnions.

ARCHANGEL AK OPFOR 4-POSITION TELESCOPING STOCK W/ CHEEK RISER, $39.99
ARCHANGEL AK OPFOR 4-POSITION TELESCOPING STOCK W/ CHEEK RISER


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #159 ·
Attach most M16/M4 style braces or stocks to your favorite Type 3 Milled Receiver AK-47 clone!

Our M4-AK Stock/Brace adapter is very unique in the way it mounts to the rifle! Ours has 2 anchors with large bolts and is INCREDIBLY STRONG!

NO PERMANENT MODIFICATIONS required!, the upper tang remains on the receiver, the lower tang is removed (not cut off) and our hardware used in place of it! If you want to switch back all you have to do is re-install the lower tang.

Why buy ours? Its incredibly strong, machined from 7075 and hardcoat anodized, offers an optimal cheek wield for irons and red dots, has built in QD sling points

7075 Aluminum
Hardcoat Anodized
2 QD sling mounts
3/8" Cheek Rise
Includes Mounting Hardware
Weighs 3.88oz including mounting hardware

JMAC M4-AK ADAPTER FOR MILLED RECEIVER, $88.16
JMAC M4-AK ADAPTER FOR MILLED RECEIVER


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
819 Posts
Discussion Starter · #160 ·
LBE Unlimited Modern Brake for 14x1 LH AK47 AKM. Fits all AK's with 14x1 threading.

Great brake for reducing recoil and muzzle rise. Technically considered a brake, but also does a good job taming flash. Looks great too!

High quality components and precise manufacturing make LBE parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

LBE AK47 AKM MODERN BRAKE, 14x1 LH, $22.95
LBE AK47 AKM MODERN BRAKE, 14x1 LH


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 
141 - 160 of 193 Posts
Top