AK Rifles banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi All,

I'm new to the forum. I just bought a WASR10 and its giving me some trouble. This screw in the trigger keeps falling out resulting in the whole trigger assembly moving inside the gun. It's hard to explain, but here is the image of what I'm referring to. IMG_6899.jpg IMG_6897.jpg IMG_6921.jpg
Any help on what I need to buy or do to correct this would be greatly appreciated. Thank you!
 

·
Registered
Joined
·
515 Posts
Check the retaining plate. On the inside of the firearm, there should be a plate on the left side that locks both of the pins inside the weapon to prevent this. It has clearly become unseated on the pin, allowing it to fall out. This is how you would completely take the trigger out if you wanted to. Reseat it on the pin's retainer groove and it should be fine.

It should look something like this and be wedged between the two pins and the Safety lever's hole on the left side. https://www.google.com/search?q=AK+...ved=0ahUKEwiPjaTepp7oAhW1KH0KHfz-CLoQ_AUIDCgD
 

·
Registered
Joined
·
1,441 Posts
It's pin not and the assembly is missing a retainer inside the receiver.
$5 - $10 depending on who makes it.
 
1 - 7 of 7 Posts
Top