AK Rifles banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I'm getting ready to convert a SAM7K to an SBR. I suspect it has a 10.5 in barrel which comes through the "booster" and ends flush with it. I also suspect that the gas block is not threaded and I will need to replace the gas block with a threaded version. What part should I be looking for? Thanks!
 

·
Registered
Joined
·
1,235 Posts
You need the bulgarian gas block/front sight combo with threads and the booster. Probably need the booster detent pin assembly. Need to cut the barrel down to 8.5 inches. What stock options are you considering?
 

·
Registered
Joined
·
5,057 Posts
KVAR has the bulgarian under folder assembly back in stock
 

·
Registered
Joined
·
5,057 Posts
The FSB is threaded so you dont have to replace it.

Even if you wanted to, Kvar is out of just the FSB. You would have to buy a complete new barrel assembly.
They're pressed and pinned
 

·
Registered
Joined
·
5,057 Posts
The FSB is threaded so you dont have to replace it.

Even if you wanted to, Kvar is out of just the FSB. You would have to buy a complete new barrel assembly.
They're pressed and pinned
 
1 - 8 of 8 Posts
Top