AK Rifles banner

1 - 8 of 8 Posts

·
Registered
Joined
·
958 Posts
Discussion Starter #1
I have a Romy G kit that I have screwed up the rear tang demill. I all have a perfect rear tang off a Bulgarian AK74. Would it work if I used the 74 rear tank in the place of the Romy one. The end product will be a beater so absolute accuracy is not mandatory.
 

·
Registered
Joined
·
958 Posts
Discussion Starter #3
I realize that but the reason I asked is that the 47 tang is installed with 2 long rivets and the 74 with 1 long and 2 short and is a entirely different shape.
 

·
Registered
Joined
·
4,701 Posts
The top hole is good to go but the bottom hole is further foward..
 

·
Registered
Joined
·
2,028 Posts
If your receiver comes without rivet holes drilled it shouldn't be a problem, huh?I have an AKM trunnion I can trade you out if you like.
 

·
Registered
Joined
·
1,451 Posts
yeah me too.have an extra rear romy trunnion that I will swap if you want.I went underfolders in some of mine.have extras.any how the tang won't affect accuracy like nalioth said.wait a second,tang?you break it off.best bet is if you don't have drilled holes yet.
 
1 - 8 of 8 Posts
Top