AK Rifles banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,526 Posts
I carefully pry the tabs up with a flat blade screwdriver, pinch them together with needlenose pliers, and pull it out. You should be able to bend them back and forth 3-5 times before they snap (at least from my experience). Even if they snap, you can make a replacement fairly easily
 

·
Registered
Joined
·
3,526 Posts
A flat head screwdriver with a notch ground in the middle (it will look like a fork), will unscrew the nut. You may have to hold othe other side of the locking pin with pliers or a vice so it won't spin. The nut is staked on, but it will twist off with persuasion
 
1 - 5 of 5 Posts
Top