AK Rifles banner

1 - 4 of 4 Posts

·
Registered
Joined
·
621 Posts
Discussion Starter #1
So at the range today, attempting to site in my posp 8 d. Problem was, I shoot and hold a good group, but when I adjust to move the group over to center of the target, my rounds begin impacting.....god knows where. What I was doing was. shoot about 5 times. then turn the dial we will say 3 clicks down, 1 click over...boom nothing to be found. I even tried taking the screws out and adjusting the zero without the clicking mech as to get half clicks, What am I doing wrong?
 

·
Registered
Joined
·
101 Posts
Are you sighting in at 200m?

Borrow a laser bore sight, set your rifle in a rest, insert the laser into the muzzle, power up & adjust your turrents.

Then, when fine tuning, go one turrent at a time.

Then, loosen your screws, zero your windage & set the elevation at your sight-in distance.
 
G

·
Guest
Joined
·
0 Posts
Whta he's saying is that at 100yds he would be grouping at 2" high 2" to the right. Then moved the reticle over to the center of the group and fired again. This should have corrected the 2" high/2" right but instead he would have to start all over.
 
1 - 4 of 4 Posts
Top