AK Rifles banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
7,602 Posts
Discussion Starter · #1 · (Edited)
We are finishing up the instruction sheets and it isn't on the website yet, but I thought some of you looking for folding solid stock options might like to see a sneak peak. :cool:

This is our Solid Stock Adapter- it allows you to add a solid stock to a Stormwerkz or ACE hinge assembly.

Price will be under $60for the SSA block with (2) 10-32 screws for mounting to the hinge and (2) black phillips head screws for mounting to the stock..

Sven
Manticore Arms









 

·
Premium Member
Joined
·
7,602 Posts
Discussion Starter · #3 ·
so you just cut off the insert portion of your stock and attach to the two screw points only or is there a lower attachment point as well?
Yes, you just cut off the portion of the stock that inserts into the receiver, drill two pilot holes for the included screws, and then mount the stock with the screws.
 

·
Registered
Joined
·
2,629 Posts
Neat. Have a few questions, how sturdy do the chopped stocks seem, how much length does it add, and would it function right with one of the compact receiver blocks?
 

·
Premium Member
Joined
·
7,602 Posts
Discussion Starter · #5 ·
Neat. Have a few questions, how sturdy do the chopped stocks seem, how much length does it add, and would it function right with one of the compact receiver blocks?
Very sturdy as long as the two screws that mount into the stock have solid material to mount in (i.e. hollow plastic in that area is not recommended, but solid polymer and wood is good to go). Adds about 3/4" with the hinge, basically makes a Warsaw length stock a NATO length stock once converted.

If you mean the ACE internal receiver block by "compact receiver blocks" that is what the one in the pictures is mounted on.

Sven
Manticore Arms
 
1 - 8 of 8 Posts
Top