[Exotic-Toys]

Hi!

I have one of ORF's ban style 74's (was a special edition). I need to get that dab of weld(assume) off of the bayo lug and heat up the brake? I assume it's silver soldered on or did ORF use something else?

Will a MAP torch get hot enough to brake lose the silver soldered brake.

Things to be careful of? I don't care about the finish on the rifle. I'm going to repark the whole thing and then gunkote in flat black. Mine has a touch of that 'orange' shit starting to grow around the site rail and inside as well. Bye, Bye Blark. Hello Park and gunkote - my two new best friends.

 

[joelad]

MAPP will get the muzzle thingy hot enoug to twist/turn it off. That is if it's not blind pinned. I don't know how they attached it. Wish I could be more help.

JoeLad :grin:

 

[Kalashnikox]

Travis,

Use a Dremel on both. The brakes are not soldered, they are tack welded on the bottom.

Mike

 

[Exotic-Toys]

Travis,

Use a Dremel on both. The brakes are not soldered, they are tack welded on the bottom.

Mike

I'll check it out in the morning.