AK Rifles banner

1 - 20 of 25 Posts

·
Registered
Joined
·
2,392 Posts
screamingdemon said:
http://farm4.static.flickr.com/3088/2710750305_d42f3fa4e4.jpg?v=0

Where the hell do I get one?
I bet you could use an airsoft to make into a lamp.
 

·
Registered
Joined
·
491 Posts
lamp

Yep, and make the trigger the on/off switch.
 

·
Registered
Joined
·
21,866 Posts
O.C. 4 U said:
It's a major award! :mrgreen:
I hate you so much.

....:feels up the AK like it was a leg::

Christmas Story for the win!
 

·
Registered
Joined
·
4,701 Posts
vit said:
screamingdemon said:
http://farm4.static.flickr.com/3088/2710750305_d42f3fa4e4.jpg?v=0

Where the hell do I get one?
I bet you could use an airsoft to make into a lamp.
Thats what Im trying to do..
 

·
Registered
Joined
·
495 Posts
It would be cool if it was a real AK that would still work after you took the lamp shade, socket, etc. off.

Here's how it would work. You would take a folding stock AK and create a detatchable base to hold it solidly upright like in the pic. Then you pull the bolt back and have it lock in place using the safety with a notch cut out.
At the threaded muzzle you would screw on something to hold the bulb socket and switch. The wire for the socket would run down the barrel and out the ejection port, The wire would have a way of being disconnected- something like a quick disconnect for air tools.
So if things are about to get ugly, grab your "lamp"

Yes, I'm weird like that.
 

·
Registered
Joined
·
7,182 Posts
AZ_BuickGuy said:
It would be cool if it was a real AK that would still work after you took the lamp shade, socket, etc. off.

Yes, I'm weird like that.
It could:

Thread the scocket 14x1 (or 24mm)

Remove the springs and hammer/disconnecter leaving the trigger.

Route the wire through the hollow PG, drill a hole in the backplate of the UF, or run it through the cleaning kit hole.

now that would be a major award.


btw - pops bought me a leg lamp as a housewarming gift. (http://www.redriderleglamps.com/store.cfm)
 

·
Registered
Joined
·
897 Posts
Discussion Starter #10
vit said:
screamingdemon said:
http://farm4.static.flickr.com/3088/2710750305_d42f3fa4e4.jpg?v=0

Where the hell do I get one?
I bet you could use an airsoft to make into a lamp.
I thought about doing that....maybe I'll try my hand at that. Should be a nice conversation piece at the very least.
 

·
Registered
Joined
·
2,275 Posts
Slinger646 said:
AZ_BuickGuy said:
It would be cool if it was a real AK that would still work after you took the lamp shade, socket, etc. off.

Yes, I'm weird like that.
It could:

Thread the scocket 14x1 (or 24mm)

Remove the springs and hammer/disconnecter leaving the trigger.

Route the wire through the hollow PG, drill a hole in the backplate of the UF, or run it through the cleaning kit hole.

now that would be a major award.


btw - pops bought me a leg lamp as a housewarming gift. (http://www.redriderleglamps.com/store.cfm)


How did the wife react? Is it still intact?
 

·
Registered
Joined
·
7,182 Posts
It is in the living room, displayed proudly. Its my favorite piece in the whole house.
 

·
Registered
Joined
·
495 Posts
Slinger646 said:
AZ_BuickGuy said:
It would be cool if it was a real AK that would still work after you took the lamp shade, socket, etc. off.

Yes, I'm weird like that.
It could:

Thread the scocket 14x1 (or 24mm)

Remove the springs and hammer/disconnecter leaving the trigger.

Route the wire through the hollow PG, drill a hole in the backplate of the UF, or run it through the cleaning kit hole.

now that would be a major award.


btw - pops bought me a leg lamp as a housewarming gift. (http://www.redriderleglamps.com/store.cfm)
I thought about that route too. However I didn't want to drill any holes in it. I'd keep it in my room on the nightstand.

Officer: You shot the armed intruder with a lamp? That's some lamp.
 

·
Registered
Joined
·
21,866 Posts
Slinger646 said:
It is in the living room, displayed proudly. Its my favorite piece in the whole house.
rub it and see if the ammo genie comes out..
 

·
Registered
Joined
·
897 Posts
Discussion Starter #16
Now the question is....do I need a underfolder, full stock, or krinkov lamp. :twisted:
 

·
Registered
Joined
·
10,316 Posts
screamingdemon said:
Now the question is....do I need a underfolder, full stock, or krinkov lamp. :twisted:

I was ready to start hatin' VIT for puttin' a subliminal suggestion in my head but I'm already wonderin' what the lampshade should look like.


this week's fire mission:
hit the Goodwill store for a battlefield-pickup lampshade


:wink:
 

·
Registered
Joined
·
495 Posts
screamingdemon said:
Now the question is....do I need a underfolder, full stock, or krinkov lamp. :twisted:
Yes.

The underfolder for the living room table. The full stock also for the living room but as a floor lamp. The Krinkov for your nightstand.

:dance:
 

·
Registered
Joined
·
897 Posts
Discussion Starter #19
OD colored lamp shade, with inert 7.62x39 rounds hanging around it like tassels.
 

·
Registered
Joined
·
21,866 Posts
Trueno said:
10Gauge said:
Slinger646 said:
It is in the living room, displayed proudly. Its my favorite piece in the whole house.
rub it and see if the ammo genie comes out..


oh for the love of...



:sad:
if it was a leg-AK lamp...






I'd lick it instead...
 
1 - 20 of 25 Posts
Top