Search Results for ‘romanian’

I recently purchased a "Balkans BFPU Romanian Stock" but having a hard time finding a "Handguard Set", I've tried the usual places (AOA, Apex,akoptions, GB, etc.) without any luck. Are these that rare nowadays? Anyone know where I might be able to find a set?

Romanian Dong Stock Set For Stamped AK Reciever.

Hey all! Built up this, seemingly unissued, Romanian kit on one of the last AK builder 80s I had laying around. Blasted with 150 grit Aluminum oxide and finished it up with a coat of Norrell's moly resin and i'm really liking the way it turned out. Hope y'all like it.

AKM / AK-47 Bakelite Pistol Grips ~ USED ~ $20 A PIECE with FREE SHIPPING ~ These grips are in good condition, not cracked or chipped (Mounting Screw Not Included). These are 1970's Era Romanian AKM Grips. I've sold many of these over the years, and they do fit most AKM Platforms. These grips...

Hey everyone, thank you for having me. I'm new to the AK building world, and would love to learn from and trade with the members here. I've got all the tools from Ak Builder, some matching Romy Md65 UF kits with new barrels, and some Recreator receivers. Also, I've got a Yugo M70Ab1 Milled UF...

Interested in a Romanian, they say they used a new production Romanian parts kit with chrome lined barrel, thoughts?

Hey guys I’m looking for a new Romanian barrel for a 1968 Izzy kit I’m putting together. Please comment here and then send me a PM. Thanks

WTB a Romanian PSL-54C Bolt. I am nearly finished with a kit build and discovered the bolt I have is so badly worn it will not pick up rounds from the magazines. I am looking to buy one that is in good condition with little wear if anyone has one. Pictured below: The PSL bolt I have next to a...

It may be number 6 on my home defense hierarchy but it’s number one I’m my heart. Finally have my Khyber pass build finished! Want to engrave dust cover but it’s serialized so maybe I’ll just buy an American made one and have it at. Also Making some trivial tassels out of wool and some brass...

Romanian akm kit minus rear trunnion barrel is included $250

This is my 1974 Romanian underfolder. I built it with an AMD65 barrel and pinned and welded the brake. Morrissey receiver. The kit is all numbers matching, but because of the shorter barrel I had to use a Draco gas tube, and modify (shorten) the original piston in the carrier. Aside from that...

Just purchased my first parts kit and I'm wanting to make sure I purchase a receiver with the correct selector markings. I've done a lot of reading on here and am still seeing mixed opinions of if the selector markings should be S FA and FF or S A R for trunnions marked similarly to this one...

This is an original Draco-C pistol in 7.62x39 MANUFACTURED IN ROMANIA by the Cugir Arms factory - it's NOT a new model Draco assembled by Century in the US. This Draco-C has an underfolder trunnion, which makes it a good candidate for conversion to an SBR, with the ATF's blessing. I can add...

Okay obligatory "How'd I do?" thread: got my first AK today! Picked up a WASR 10, 200 rounds of Tula, 4 steel mags and a polymer 20 rounder for $950. Now as for the rifle: Its Marked WASR10, and seems to have matching numbers everywhere I can find them: trunion bolt, carrier, top cover. Wood...

Hey hope everyone’s doing well I’m curious if anyone might know what the value of a Romanian paratrooper PM 64 RPK might be valued at I’m thinking about selling mine just trying to get an idea on value mine is professionally built by in range Inc. Has a correct Green Mountain chrome barrel and a...

Ordered this dong from Apex with the intention of cutting it down to made the shark fin for my Khyber pass build. It comes in and it turns out it has some trench art on it , two names and some other stuff. I’m hesitant to cut I’d down now. I know it’s preference but I’m Curious to see what y’all...

Pretty self explanatory, but the carrier comes to a hard stop about an inch or so before it can be fully seated, but the bolt itself sits flush on the barrel. Seemingly perfectly locked in. I bought an already headspaced barrel and I did not have this issue when I first put it together. Am I...

Looking for any romy front trunnion, would prefer a virgin but any front trunnion that's not drilled over 7mm.

Looking to buy an early Romanian wood grip and butt plate & swivel with hardware. Thanks.

Romanian MD63 hardwood pistol grip with original ferrule. It appears that a clear top coat of finish was applied to the grip. $50 shipped. Payment via USPS MO, Western Union MO, cash, or Zelle (preferred). No other forms of payment accepted so please DO NOT ask. Please post "I'll take it"...