AK Rifles banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 19 Results
  1. AK Parts & Accessories Classifieds
    Oops. My kit has a threaded barrel. My loss is your gain--I bought this Firing Line milled receiver for a PIN AND PRESS barrel a few years ago. It's a complete receiver, ready to build on, with discoloring from sitting in a drawer in my workshop for a while. The cheapest milled receiver...
    $289 USD
  2. AK Rifles Classifieds
    This is my very first "for sale" post here. I don't have any feedback yet, however, I do have more than a few positive feedback in GAFS on Reddit under 'u/Responsible-Food-117' username. And I'm also open for any phone or video calls if you want to verify prior to purchasing the item. With that...
    $2,400 USD
  3. AK Parts & Accessories Classifieds
    Looking to see what is out there in Polish type 3 / milled parts. If anyone is sitting on a type 3 or Polish GN60 kit from Arms of America or anywhere else feel free to message me and we can make a deal. Thank you fo me reading!
    $1,000 USD
  4. AK Rifles Classifieds
    In the process of medically separating from the Army, along with paying a lawyer to deal with the VA we will soon have a lot of other bills. My loss is your gain. Weapon is in excellent condition, round count is under 500. Bundle includes rifle, 3 magazines, 125 rounds of ammo and a GEN 1...
    $2,250 USD
  5. AK Rifles Classifieds
    Selling my milled AKML with a gen2 Polish sling and with or without the the NSP-3 night vision scope. There were only 200 of these built years ago. This is #124/200. It’s never been fired and the action is super smooth. I went buying crazy and as much as I hate to do it, this one doesn’t make...
  6. Build It Yourself
    so I recently bought a brand new SLR 95 from a local gun show. The buyer hadnt even shot it and I was able to get it for around $1,100 because I was in the military. I started off by throwing away the old wood furniture that came with it and replaced it with the magpul handguard because it...
  7. Build It Yourself
    I bought a Tortort Yugo receiver and have every part except for the front cover plate. These things are still available on apex for $5 plus $10 shipping, but I don't wanna pay $15 more for such a simple part. Does anyone know anything about making a diy plate, and is it possible to get a...
  8. Bulgarian
    Every place I looked online shows the Arsenal SAM7R-61 to be out of stock. Then last night I found a dealer showing them available. https://www.verleshuntingfishing.com/rifles/semi-automatic-rifles/arsenal-sam-7r-semi-auto-rifle So I called them up and the guy I talked to said Arsenal stopped...
  9. New Member Introductions
    Hello everyone, thought I would stop in and say hello here before I posted elsewhere on the forum. I cam here searching for information and maybe parts for my newly acquired Arsenal SLR-101s. I have had a few other AK's over the years (WASR-10, N-PAP) but I haven't been very active with the...
  10. Build It Yourself
    First I would like to say hello to everyone on the forums, soon I plan on building the 80% Fixed stock Russian T3 from Torthort. Only information on these is (Machined to accept 23mm press in barrels. These are compatible with the milled Bulgarian and Polish kits on the market) I may or not...
  11. Build It Yourself
    I obtained a Norinco Hunter in trade that was bare.. just a barreled receiver,bolt and carrier in trade. I had most of the stuff hanging around so I whipped up a District-9/Fury Road rifle. I had one of those kvar receiver blocks that had the 4.5mm folder cuts in it. I almost threw it out...
  12. AK Parts & Accessories Classifieds
    As the title stays, I'm looking for a Bulgarian Milled push type receiver stub for a minty parts kit I have. thanks
  13. Yugoslavian
    Ok this may be a stupid question (questions) but this is my first build and want to do the appropriate research first. I got most of my parts as a gift to start and was just making sure this project is doable with what i have. I got a milled Yugo M70AB underfold kit, a stamped receiver from...
  14. AK Parts & Accessories Classifieds
    Looking for a Bulgarian ARM9 Pistol Grip for my Arsenal SAM7SF. These come standard on the SAM7K pistols and I would be willing to trade my US Made grip for one. Here is the link from KVAR:AK-47/74 & AR Rifles,...
  15. USA
    I went ahead and ordered one of the DDI milled reciever Rifles a couple of weeks ago from AIM. AIM had it out the door within 4 busines days, and I picked it up a few days later. Cosmetically this Rifle is nicely finished. The manufacturers website says it is Gunkote. It showed up pretty much...
  16. AK Parts & Accessories Classifieds
    I'm looking to buy a complete Bulgarian milled parts kit with matching numbers like the ones Sportsman's Guide offered a while back. Please let me know what you have and how much you are asking. Thanks in advance.
  17. AK Parts & Accessories Classifieds
    I know this is a long shot. Looking for a Ironwoods Design Full Furniture Set or the Stock only for a Mak 90 Milled Stock. Only need the stock and don't want to wait for a new one from IWD. PM me, I can do cash or trades. Thanks I-Ron Dayton Ohio
  18. Build It Yourself
    I just purchased a C39v2. It is my first AK or variant. I want to put a folding stock on it without grinding, cutting or damaging the original components in any way. I know the Magpul kit fits, but i would prefer something else. Has anyone used the Ace kits? What do y'all recommend?
  19. Chinese
    I'm new to the boards and a MAK90 newbie with some questions... I do have some experience with AK varients having owned an Arsenal SGL20 years ago. I currently have an opportunity to trade my M&P15 AR for a "fair/good" condition 1993 milled MAK90 (plus mags, ammo and a new Kahr CW9 pistol). It's...
1-19 of 19 Results
Top