Rguns Tula AKM parts kit ID help
I thought that Rguns was sold out of their Tula AKM kits and just picked up a 68 Tula kit when I saw that they had a few listed on GB. I think there's still one left.
I'm pretty happy with what I ended up with! Numbers all match, kit seems in good shape and mostly correct. But even after reading through the very helpful "Differences" thread, I could still use a bit of help with a few IDs.
Photos of all the parts: https://imgur.com/a/JCi4QHf
Stuff I'm not so sure about:
Rear sight block: The leaf is obviously Izhevsk and there's what looks quite a bit like an Izhevsk arrow mark on the barrel section. But the dimple looks smaller than the barrel pin and there's what looks to me like a rounded triangle stamp on the front face of the block. Also, no stamps in front of the leaf. I think it looks machined rather than cast, but I'm not sure.
HG retainer: machined, but no stamps that I can see to identify Tula or Izhevsk.
Trigger guard: The photo of the stamp inside isn't the best, but in person it seems to clearly be a rounded triangle with a 3 inside. However, that also looks like a hardness test dimple on the front side of the mag catch.
Wood: Just no idea. Front pin on the stock is in the middle, but there's what seems to be a diamond stamp next to it.
Parts that seem fairly definitive:
Trunnion: no real surprises here. For Tula, it seems like a nice impression on the star. Can't make out a trunnion sizing code though, unless the partial stamp on the right is a 2 or 3?
Front sight block: Machined Tula
Gas block: Machined, presumably Tula since it's attached to the same barrel segment as the FSB.
Recoil rod: Machined Tula
Carrier/Bolt: Matching numbers
Selector: Rough cross-hatching and blocky numbers suggest Tula
Rear trunnion: Lotsa Tula circles
Gas tube: numbers match
Pistol grip: Tula dashed mold mark
Dust cover: numbers match