My Maadi MISR 10 won't feed
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 15 of 53
Like Tree7Likes

Thread: My Maadi MISR 10 won't feed

  1. #1
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times

    My Maadi MISR 10 won't feed

    Picked up a cool looking MISR 10 today with a just got ran over by a tank look, took it to the range and it won't feed from mag. Tried 4 different type mags. Bolt just slides over rounds. Only if I loaded a mag with the top round on the right side of mag and held rearward pressure on mag it would chamber. But then it wouldn't eject the spent casing and would jam. So nothing but FTFs and FTEs. This rifle looks like it's been thru hell and back so I know it has ran like a champ sometime in its life. I want to revive it. What should I do first? This is my first AK for shootin so I'm ignorant to making this platform perform.

  2. #2
    Senior Member

    Member #
    3901
    Join Date
    Dec 2006
    Location
    ohio
    Posts
    20,683
    Liked
    19841 times
    Welcome to the forum!

    Pictures would be very helpful in helping to diagnose the problem(s). At the very least there might be a problem with the bolt and possibly the receiver.
    "There really is something broken between your ears. You know this, yes?" - Redbear

    Closed captioned for the drinking impaired. Wait...

  3. #3
    Senior Member

    Member #
    17427
    Join Date
    Feb 2010
    Location
    Near Philadelphia Pa
    Posts
    11,461
    Liked
    8509 times
    When you say "doesn't eject" do you mean it doesn't extract from the chamber or that it stays on the bolt
    Last edited by Arik; 12-08-2019 at 08:00 AM.

  4. Remove Advertisements
    TheAKForum.net
    Advertisements
     

  5. #4
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    When it cycles, it will not eject and will try to load next round but will jam with spent case still in chamber.

  6. #5
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    Exactly what should I take pics of?

  7. #6
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    Some pics of magwell and mags
    Attached Images

  8. #7
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    Stays on bolt

  9. #8
    Junior Member

    Member #
    62185
    Join Date
    Feb 2019
    Posts
    19
    Liked
    11 times
    Looks like ejector is almost completely gone on rail.
    GTPI and 10Gauge like this.

  10. #9
    Junior Member

    Member #
    62185
    Join Date
    Feb 2019
    Posts
    19
    Liked
    11 times
    Feed issue is probably mag well related. Does mag have a lot of forward/ backward play? Evidently if holding rearward pressure on the mag allows it to feed, I would say yes. That magwell looks pretty beat up.

  11. #10
    Senior Member

    Member #
    50082
    Join Date
    Sep 2017
    Location
    Roseto Pennsylvania
    Posts
    481
    Liked
    208 times
    That whole magwell area looks bent to hell. Did someone really run over it.
    10Gauge and ClownBaBy2013 like this.

  12. #11
    Senior Member

    Member #
    3901
    Join Date
    Dec 2006
    Location
    ohio
    Posts
    20,683
    Liked
    19841 times
    Quote Originally Posted by Re22hornet View Post
    Exactly what should I take pics of?

    You're doing well so far. That magwell looks bent inward on one side which is likely the cause of the magazine issues.

    We'll probably need to see the bolt face, the top of the gun without the top cover on, as well as what the chamber area looks like.
    "There really is something broken between your ears. You know this, yes?" - Redbear

    Closed captioned for the drinking impaired. Wait...

  13. #12
    Senior Member

    Member #
    59642
    Join Date
    May 2018
    Location
    SW Florida
    Posts
    134
    Liked
    76 times
    Looks like the ejector has been ground off. While your taking photos, with the rifle upside down push and hold the mag release so you can get a good shot of the selector stop plate where the magazines rear lug engages .
    "America does not need to see the tax return of a billionaire who became a public servant.
    America needs to see the tax returns of public servants who became millionaires while being public servants"

  14. #13
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    Ok, some more pics

  15. #14
    Senior Member

    Member #
    59642
    Join Date
    May 2018
    Location
    SW Florida
    Posts
    134
    Liked
    76 times
    Not only is the ejector missing , it looks like the selector stop plate is pretty much gone so the possibility of firm mag lock up seems out and it also looks like someone took a grinder to the bottom of the bolt or could it be worn that flat?
    I'm thinking it's a parts gun or get a new receiver and a few other parts and rebuild! Have you checked the barrel? even a simple bullet test just to be sure it's not a sewer pipe.
    If it were mine i'd evaluate all the parts to determine if it is worth rebuilding.
    "America does not need to see the tax return of a billionaire who became a public servant.
    America needs to see the tax returns of public servants who became millionaires while being public servants"

  16. #15
    Junior Member

    Member #
    65095
    Join Date
    Dec 2019
    Posts
    20
    Liked
    1 times
    Well first I'll try to get my money back. If i can't then I will definitely part this one out. Have no clue what Maadi parts go for but I have a feeling rebuilding with new receiver and parts will cost more than I want to have in a shooter AK, I paid 650 for the rifle yesterday.

 

 
Page 1 of 4 1 2 3 ... LastLast

Home | Forum | Active Topics | What's New

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.