Newbie help needed

[04ZREX]

K-Var has the following listed on their website. What do they call the plunger or pin or what ever they call the part that's missing, which holds the triangle buttstock in place. I can't seem find that part on their website. I have the triangle buttstock already, just need the remaining parts for a Kyber Pass build. Any help is much appreciated.

[CumbiaDude]

I can't find just the hinge pin, either. If you're doing a Khyber, though, it would be totally appropriate to just wing it. I know people here have done it so you can probably get some advice on what to use and how to do it. *shrug*

[04ZREX]

Thanks, I was afraid others have had the same problem.

[04ZREX]

Okay guys, I got a message from forum member 45FMJoe with the following part number.

KR-001 is the part that I was looking for from K-Var website. Thank Joe!

[John Paine]

Mike Friend at THE FIRINGLINE can build you one for $10.00!

[steves]

hello,kvar plunger may be refering to the rear stock latch,spring and spring retainer pin.the stock hinge pin comes in 4.5 mm or 5.5mm.it is easy to make a hinge pin with a piece of rod stock or drill bit and a file and drill to reduce rod stock to correct diameter. none of these parts are in the posted photo.good luck steves

[cvsaiga12]

i bought a saiga 12 in november and tapco'ed it out w/out moving the trigger group
i would like to obtaine a 47 variant I don't have much metal working or mechanical skills
Should I build or buy?
and for either what type should i get ?
I have a polish bayonet that i bought from akarfal so i'd like to be able to use it.
thankz for any help!!

[ironeagle16]

What type of stock or ak47 variant?

i bought a saiga 12 in november and tapco'ed it out w/out moving the trigger group
i would like to obtaine a 47 variant I don't have much metal working or mechanical skills
Should I build or buy?
and for either what type should i get ?
I have a polish bayonet that i bought from akarfal so i'd like to be able to use it.
thankz for any help!!

[cvsaiga12]

i think i would like a fixed wooden stock.
I'm not shure wat type of variant. thats part of what i need help on I looked at a chinies ak that i didn't like and i looked at a czech one but my favorite i saw was the romanian.
thankz